Anchoring Angle For Lockers without legs

use a locker anchoring angle (running from front to rear on the inside bottom of the locker) providing a bearing sur-face for the fasteners which are connected to the floor or locker base. For the typical continuous row locker installation, order one locker anchoring angle for each end of a row, plus sufficient quantity to provide angles on 36″ centers. On single row installations where backs are against a wall, lockers should be suitably wall anchored as detailed in assembly instructions packed with lockers and below installation drawings.

No. 5872 – For 12″d lockers

No. 5873 – For 15″d lockers

No. 5874 – For 18″d lockers

No. 5875 – For 21″d lockers

LAMINATED HARDWOOD AND PLASTIC LAMINATE TOP BENCHES

Laminated Hardwood Top – shall have clear hardwood tops 9-1⁄2″ wide by 1-1⁄4″ thick finished with two coats of acrylic finish and available in lengths from 3′ to 12′.
Plastic Laminate Top – shall be color matched plastic laminate, or wood-grain plastic laminate, over laminated hardwood core. Long sides shall have full 180° soft edge. Tops shall be 12’w x 1-3⁄4″h and available in lengths
from 3′ to 12′.
Steel Pedestals – Spaced on not more than 6′ centers. Overall height shall be 17-3⁄4″. Finish of pedestals shall
be same color as lockers. Steel pedestal base shall be
14-gauge steel with 1-5⁄8″ tubing uprights.
Heavy-Duty Pedestals – Single piece cast iron construction. Spaced on maximum 6′ centers. 2-1/4″ diameter post with 6″ diameter top and bottom. 3/16″ material thickness.
Aluminum Bench Top – 1-1/4″h x 9.5″ wide aluminum alloy with a clear anodic coating.
Aluminum Bench Pedestals – Pedestals shall be two pieces of anodized aluminum extrusion (6105-T5)
2-1⁄4″ x 3⁄4″ formed and unit-welded. Base measures
12-5⁄8″w x 14-5⁄8″h. Optional rubber feet.
Trapezoid Pedestal – Made from 1/4″ x 3″ aluminum bar stock and features black anodized finish.
Maximum bench overhang from middle of pedestal
must not exceed 6″.
Note: Each pedestal shall be attached to top by screws and shall be anchored to floor by suitable anchors.

ALUMINUM BENCHES

Anodized Aluminum Design
Rustproof, anodized aluminum is light, yet incredibly strong and easy to maintain in almost any environment. One piece bench stands are secured to pedestal base with adjustable clamps. Rounded edges and center traces provide comfortable, skid resistant seating. Use as portable bench or install as a fixed position unit.